Single Coat Hook

Tools

Forge, anvil, hammer, tongs, punch/drill (later), vise, file

Materials

• Mild steel flat bar: 25 x 6 mm, 200–250 mm

• (Optional) 2 screws for mounting

Steps

1. Create mounting plate: Heat one end (50–60 mm). Flatten slightly wider to make a plate.

2. Square and clean edges on the plate.

3. Mark hole positions (2 holes).

4. Punch holes hot (if you have a punch) or drill cold later.

5. Form the hook: Heat the other end and bend into a smooth hook shape on the horn.

6. Add a slight return at the tip so coats don’t slide off.

7. Final alignment: Ensure hook sits proud and plate is flat.