How Much Does It Cost to Start Blacksmithing in the UK? (Beginner Breakdown)

Getting StartedTools & EquipmentSafteyCosts & Setup
Written By Adam Gent

Introduction

If you’re thinking about getting into blacksmithing in the UK, one of the first questions you’ll ask is:

How much does it actually cost to start blacksmithing?

The honest answer is: less than many people expect — but more than social media often suggests.

This guide breaks down realistic beginner costs in the UK, what you actually need to get started safely, and where you can save money without cutting corners.

Quick Answer

For most beginners in the UK, the cost to start blacksmithing is:

  • £250–£500 for a basic, safe beginner setup

  • £600–£1,000 for a comfortable home workshop

  • £1,200+ if buying higher-end or all-new equipment

You do not need a professional forge or a huge anvil to begin.

Why Blacksmithing Costs Vary So Much

Costs vary depending on:

  • Propane vs solid fuel forge

  • New vs second-hand tools

  • Space (garden, garage, shed)

  • How DIY you’re willing to be

Many beginners overspend early on tools they won’t properly use for months.

Core Blacksmithing Costs (Beginner Setup)

🔥 Forge — £120 to £450

The forge is usually your biggest initial expense.

Beginner options:

  • Propane forge – cleaner, easier, and popular in the UK

  • Solid fuel (coal/coke) – traditional, messier, more setup

Many beginners choose a single-burner propane forge because it offers a good balance between cost, ease of use, and consistent heat for learning basic techniques.

Typical UK costs:

  • Single-burner propane forge: £120–£250

  • Better insulated / multi-burner forge: £300–£450

A popular starter Forge - https://amzn.to/4qNhH6j

⚒️ Anvil — £100 to £400

You don’t need a huge anvil to start.

Good beginner sizes:

  • 30–50 kg (65–110 lb)

Cast steel anvils are perfectly acceptable for beginners.

Typical UK costs:

💡 Many UK blacksmiths start with second-hand anvils from auctions or Facebook groups.

🔨 Hammers — £25 to £70

You only need one or two hammers to begin.

Recommended:

  • 2–2.5 lb cross-peen hammer

  • Optional rounding hammer later

Typical UK cost:

  • £25–£70 total

Check out Forged Ironmongery - https://forged-ironmongery.co.uk/product-category/blacksmith-tools-clothing/victory-blacksmith-tools/

🗜️ Tongs — £30 to £80

You’ll need at least one pair of tongs.

  • Flat jaw or wolf-jaw tongs are versatile for beginners

Typical cost:

  • £30–£80

If you get some with your forge - THROUGH THEM AWAY, they are as useful as a chocolate fire gaurd!

🧤 Safety Gear — £40 to £100 (Do Not Skip)

Safety is non-negotiable.

You’ll need:

Typical UK cost:

  • £40–£100

🔩 Steel & Consumables — £20 to £60

To get started:

  • Mild steel bar - Try B&Q for smaller piece’s - Usually located with the ‘building profiles’

  • Scrap steel (often free or cheap)

  • Propane - DON’T buy the Leisure gas! there is not enough pressure to run a forge - For a single Burner 6KG Propane will get you going.

  • solid Fuel - Coke/Coal can be expensive and need a bulk order. I started with BBQ charcoal Briquettes (BBQ lump-wood burns through so fast)

Typical initial cost:

  • £20–£60

Total Beginner Cost Summary

Setup Level Estimated Cost

Bare-bones but safe £250–£350

Comfortable beginner £400–£700

Higher-end setup £800–£1,200+

Where Beginners Can Save Money

✅ Buy second-hand anvils and tools
✅ Start with a single-burner propane forge
✅ Avoid specialist tools early
❌ Don’t skip safety gear
❌ Don’t oversize your anvil or forge

Final Advice for Beginners

If you’re starting blacksmithing in the UK, aim for a safe, simple setup and upgrade gradually as your skills grow.

Most experienced blacksmiths will tell you the same thing:

You don’t need everything on day one — just enough to start forging safely.

This guide is based on independent research and learning experiences. The tools mentioned are examples commonly used by beginners and are not sponsored recommendations.

Next up:
“Essential Blacksmith Tools for Beginners (What You Actually Need)”

This article contains affiliate links. If you purchase through these links, we may earn a small commission at no extra cost to you.

Adam Gent
Previous

Essential Blacksmith Tools for Beginners (What You Actually Need)